Mar 05, 2020 Atstāj ziņu

Pareiza pulvera maisiņu formēšanas mašīnas apkopes un uzturēšanas metode

Machine in addition to the correct use of the correct care, the correct care will make the machine in operation without problems, use life extension. Improper handling not only won & #39;t make the machine last longer, it will also make the machine go wrong. As the saying goes, sharpening the knife does not miss the wood work, so on time remaining is very important!


Gludi

1. Katra ritošā gultņa slīpuma līnija var būt bez - eļļas

2. Pakāpju pārnesumkārba (mainīt - maisu garu pārnesumkārbu) sāka darboties vienu mēnesi, ikmēneša eļļas maiņa, pēc katriem sešiem mēnešiem - eļļas zīme N320 rūpniecisko pārnesumu eļļai vai gludas eļļas ISO VG320 specifikācija.

3. Differential tank, start to operate once a month to change the oil, after every four months to change the oil, the oil brand is N320 mechanical oil.

4. After each transmission chain works for 1000 hours, stop smoothing with industrial butter.

5. After the horizontal seal shaft eccentric local grease smooth.

6. Upper clamping transport and guarantee machine shaft and joint shaft joint joint should often smooth.


Apkope

1. After three months of operation of the stepless gearbox, it is usually required to adjust the tension of the chain in the stepless gearbox.

2. Packaging machine transmission chain tension adjustment, the new machine after three months of operation, the demand will be the transmission chain sprocket tension adjustment to eliminate the chain too loose. After the general operation is adjusted once a year.


Nosūtīt pieprasījumu

whatsapp

Telefons

E-pasts

Izmeklēšana